Air-Air Heat Exchanger
The MIX range of wall or door mounted air-air heat exchangers have been designed to cool electrical enclosures using ambient air.
The MIX range of wall or door mounted air-air heat exchangers have been designed to cool electrical enclosures using ambient air.
A range of roof mounted air-water heat exchangers designed to cool electrical enclosures using a chilled water source.
The WID range of anticondensation heaters are suitable for installation in all enclosures, designed to protect equipment from water damage due to condensation.
The Ausrack Plus Network and Server cabinets are enhanced with the addition of vertical and horizontal cable management solutions.
B&R’s Class B and Class C 19 inch security cabinet solutions are suitable for protecting equipment to government security standards.
A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.
An IP66, 19 inch cabinet system designed to protect sensitive network equipment from harsh environments where equipment is exposed to dust or water.
A 2-post frame designed to provide a functional and cost effective solution where accessibility is a major requirement.
A 19 inch server rack frame that can be configured into suites & clad as per application requirements. The server rack features allow cable access across the front and rear of the rack.
A 19 inch network cabinet combining versatility & strength with easy-to-use features. Accommodates medium to large passive patching networks & active communications equipment.
Designed as a purpose built 19″ server cabinet. The Ausrack Plus Server features well thought out mounting options and excellent cross flow ventilation.
A rack with 4 corner posts often used for Transmission & Data Applications in telecommunications exchange & data centre environments. For 19, 21, 23 or 26 inch equipment.
Light duty wall mount 19″ bracket. Suitable for applications where cabinet mounting is not practical and space is limited.
An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.
An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.
B&R’s patented split captive plug ring design means easy removal of plugs without the hassle and waste of cutting power cords.
Climate control accessories such as spare filters to prevent dust entering the enclosure, thermostats, humidistats, level switch and solenoid valves.
Cold aisle containment increases cooling efficiency, reduces power consumption by preventing different air temperature zones from being mixed together in a data centre.
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
The Connector TE is a steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Small main boards & CT chassis systems manufactured from 1.6mm zinc coated steel or 316 stainless steel made suitable for mounting of various transformers.
A range of enclosures designed for installation of telecommunications equipment inside a customer’s premises.
A range of metal surface and flush mounted DIN rail loadcentres for residential commercial applications.
Electronic locking provides security for peace of mind, ensuring that a data centres are kept secure with superior traceability and ease of manageability.
B&R Enclosures have a range of enclosure locks and lock inserts to suit our range of electrical enclosures.
Enlogic locking IEC power cords provide protection against accidental power loss of your attached IT equipment
Enclosures designed for protection of electrical equipment in applications where flammable liquids, gases and vapours or combustible dusts are present.
Enclosures designed for protection of electrical equipment in applications where flammable liquids, gases and vapours or combustible dusts are present.
The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.
Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
The flat roof electrical box is made from 316SS and suitable for use in Zones 1 & 2, 21 & 22 applications.
An IP65, steel enclosure suitable for a variety of indoor, general electrical applications. It is made from powdercoat painted steel and is available off the shelf.
Standard control stations that can be combined into one unit using a maximum of six in configurations to suit the application requirements.
An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.
Terminal enclosures for Zones 1 & 2, 21 & 22. Suitable for both dust and petrochemical areas where stainless steel is not a requirement.
A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.
A range suitable for both fibre and copper lines, and surface or flush mounted, these enclosures are supplied complete with a double GPO and 8 port RJ45 Cat5 patch unit.
An IP55, multiple application, built-to-order bayable enclosure system.
An IP55, multiple application, stand-alone enclosures in single or double door configurations.
The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.
The EGO range have been designed to cool electrical enclosures to prevent failure of installed equipment. Once installed the enclosure can be rated to IP54.
The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.
A range of metal enclosures for general purpose metering requirements, suitable for use in internal and switchroom applications.
The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.
Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch IP from B&R is an IP66, aluminium general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch IP from B&R is an IP66, steel general purpose enclosure and switchboard building system with a huge range of accessories.
An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.
The NOX series is a range of wall or door mounted air conditioners suitable for indoor or outdoor applications.
The NZ Temporary Power enclosure is an IP23 metering enclosure suitable for both single and multi-phase installations.
Ausrack Lite is a light duty network cabinet designed for standalone installations in offices and data cupboards. It includes most of the accessories typically required for an installation.