Pilbara SP with Sunshades

An IP66 enclosure with sunshades designed for the most common mining, mineral processing and infrastructure projects.
AS/NZS 61439

Product Information

Applications

Developed in collaboration with on-site electrical engineers, contractors and designers, the Pilbara SP range is purpose-built in sizes tailored to the most common requirements of mining, mineral processing and infrastructure projects. Typically used in local control stations, mini control consoles and motor isolation control stations.

Features

  • IP66 protection rating – more info on IP ratings
  • Sunshades protect the internal equipment from the effects of the sun.
  • Pilbara SP options without sunshades available – Pilbara SP
  • Pintle hinges
  • Door stay
  • Lifting lugs conform to AS4991:Lifting Devices
  • 30° sloping roof to prevent build up of water and solids
  • IP55 LockSock protective cover
  • Easy installation with top and bottom mounting flanges
  • Includes schedule holder (excluding SP040425 range)
  • Region D wind rated to AS1170.2-2002: Structural design actions – Wind actions

Construction

  • Manufactured from Zinc Coated Steel
      • Enclosure – 2mm thick
      • Sunshades – 1.6mm thick, OR
  • Manufactured from 316 Stainless Steel
      • Enclosure – 1.5mm thick
      • Sunshade – 1.5mm thick
  • ASSDA approved N4 surface finish for 316 Stainless Steel, OR
  • Powdercoated X-15 Orange for Zinc Coated Steel

DownloadsAccessoriesMore ProductsEnquiry

Order Guide

Part NumberHeight (mm)Width (mm)Depth (mm)Usable Depth (mm)Total Height (mm)CAD BlocksEnquiry
SP070522/SK700500200153952Enquiry
SP100822/SK10008002001531252Enquiry
SP040425/SK*400400250203681Enquiry
SP070535/SK7005003503031040Enquiry
SP100840/SK10008004003531367Enquiry
SP070522/S/SK700500200153952Enquiry
SP100822/S/SK10008002001531252Enquiry
SP040425/S/SK*400400250203681Enquiry
SP070535/S/SK7005003503031040Enquiry
SP100840/S/SK10008004003531367Enquiry
SP070522/SRO/SK700500200153952Enquiry
SP100822/SRO/SK10008002001531252Enquiry
SP040425/SRO/SK*400400250203681Enquiry
SP070535/SRO/SK7005003503031040Enquiry
SP100840/SRO/SK10008004003531367Enquiry

* Does not come with a front sunshade.

Accessories

  • Escutcheons – hinged
  • Pintle hinges – stainless steel
  • Gland plates – brass or aluminium
  • Fans and filters
  • Lock options
  • 316 stainless steel hinges

Lock Options

Standard

Catalogue No.TypeMaterialCommentsLock Insert TypeKeyImage
SP/LCKSwing Handle - PadlockableChromed SteelStandardPadlockSwing Handle Padlockable - Chrome Steel SP
SP/LCK/SSwing Handle - PadlockableStainless SteelStandardPadlockSwing Handle Padlockable - Stainless Steel

Options

Catalogue No.TypeMaterialCommentsLock Insert TypeKeyImage
SP/LCK/DCLockSockPlasticOptionLockSock
Inserts for Turnbuckle Locks - Optional
Catalogue No.ProductMaterialLock Insert TypeKey

AS/NZS 61439 Compliance

AS/NZS 61439 is the new series of standards for low-voltage (LV) switchgear and control gear assemblies. For more information on whether you need to comply see our AS/NZS 61439 page.

Click the bar below the requirements and responsibilities for complaince with AS/NZS 61439 for this enclosure.

The following definitions apply to this table: -

  • Original Manufacturer* - Switchboard designer and manufacturer of the switchboard enclosure.
  • Assembly Manufacturer* - A switchboard builder.
  • Original Equipment Manufacturer - The company who manufactured the switchgear used in final assembly.

*The original manufacturer and assembly manufacturer can be the same company or different companies.

If you are a SWITCHBOARD BUILDER this means you are the ASSEMBLY MANUFACTURER and you may be the ORIGINAL MANUFACTURER too. Any switchgear you order will need to be covered by the requirements of the Original Equipment Manufacturer.

B&R has some (but not all) of the responsibilities of the ORIGINAL MANUFACTURER.

If you are an END USER of the equipment you can see who has responsibility from these definitions.

NoCharacteristic to be CheckedClauseResponsibilityComments