Enlogic’s alarm beacons have a magnetic base so it can be easily attached to the top of the rack. The alarm beacon can be added to any sensor port of any Enlogic EN series PDU or EZ series Inline Energy Meter.
Enlogic’s temperature and humidity sensors are designed to add comprehensive
environmental monitoring to any Enlogic EN Series PDU or EZ Series Inline Energy Meter. The temperature and humidity sensor monitors the temperature and relative humidity in the data centre and transfers the data to the control centre.
|ARPRAEA9102||Temperature sensor only|
|ARPRAEA9103||Temperature / Humidity sensor|
|ARPRAEA9105||3 Temperature, 1 Humidity sensor combination|
Input Sensor Hub
Enlogic’s 3 Sensor Input Hub allows for 3 additional sensor ports to be added to either sensor port of any Enlogic EN Series PDU or EZ Series Inline Energy Meter.
|ARPRAEA9106||3 sensor inputs|
Door Switch Sensor
Enlogic’s door switch is a manual door switch that can be added to either sensor port of any of any Enlogic EN Series PDU or EZ Series Inline Energy Meter.
|ARPRAEA9109||Sensor for door switch|
Dry Contact Input
Enlogic’s dry contact input can be connected to other auxillary equipment and feed the information through your network.
Spot Fluid Sensor
Spot fluid sensor monitors a remote location for the presence of any liquid with
resistivity of less than 2M Ohms per cm (including distilled water) and transfers the data to the control centre.
|ARPRAEA9111||Complete with sensor and cable|
Rope Fluid Sensor
The Rope Fluid Leak Sensor monitors for early detection of liquid with a resistivity of less than 2M Ohms per cm (including distilled water) in the monitored area along the entire length of the rope.
|ARPRAEA9112||Complete with sensor and cable|
The photoelectric smoke sensor detects smoke in the cabinet and sends the alarm signal through the EN Series PDU or EZ series Inline Meter.
Serial Connection Cable
The serial communication cable allows for a direct connection to the PDU for easy setup before connecting to the network.
|ARPRAEA9116||Includes 3m of cable|
Rittal / HP Cabinet Bracket
A bracket that allows an Enlogic PDU to fit in Rittal and HP data cabinets.
|ARPRAEA9120||Bracket to suit Rittal / HP cabinets|