Stainless Steel Enclosures

Stainless steel enclosures protect electrical equipment where there is a potential of corrosion from the surrounding environment. Usually this occurs where there is is some risk of salt water coming into contact with the enclosure, whether it be from sea spray, or some of the inland areas where the ground water can be quite high in salts. For more information on this see our articles on material selection and tea staining.
B&R Enclosures uses Australian Stainless Steel Development Association (ASSDA) processes and only 316 stainless steel to ensure a long enclosure life and minimal maintenance.
The range of stainless steel enclosures includes: –

Ausrack IP - 316 Stainless Steel - 19 inch Weather and Dust Proof Rack

Ausrack IP – 316SS

A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.

More...

Bowen BW

Bowen Series – 316SS

An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.

More...

Connector TEMF - Stainless Steel

Connector TE MF – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Connector TE - Stainless Steel

Connector TE – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Field FC

B&R’s field enclosure is an infrastructure cabinet designed for roadside monitoring equipment with ITS equipment. It is also used for GPS stations and radio equipment.

More...

Finucane FI - 316SS

Finucane FI – 316SS

The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.

More...

Fixed Lid Control Station

Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

More...

Fixed Lid Electrical Enclosure

The flat roof screwed terminal box is made from 316 stainless steel and is suitable for hazardous Zones 1&2, 21&22 applications where flammable liquids, gases & vapours or combustible dusts are frequently present.

More...