An IP23 metering enclosure suitable for both single and multi-phase installations.

The NOX series is a range of wall or door mounted air conditioners suitable for indoor or outdoor applications.

An IP66, highly robust distribution board system. Designed to be the ideal extension to the B&R Infinity 3G switchboard range and typically used in commercial, industrial and some multi-residential developments.

An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.

Suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

A customisable enclosure suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

Suitable for use within chemical, petrochemical, dust and grain applications where a small enclosure is required.

The NZ Temporary Power enclosure is an IP23 metering enclosure suitable for both single and multi-phase installations.

B&R Enclosures have a range of enclosure locks and lock inserts to suit our range of electrical enclosures.

Electronic locking provides security for peace of mind, ensuring that a data centres are kept secure with superior traceability and ease of manageability.

Finding a way to easily and correctly mount electrical enclosures is a common problem. B&R Enclosures supply MEB/S wall mounting brackets.

A range of metal enclosures for general purpose metering requirements, suitable for use in internal and switchroom applications.

A comprehensive range of links varying from 100Amp to 400Amp.

A comprehensive range of Uncovered Links varying from 90Amp to 250Amp.

A range of metal surface and flush mounted DIN rail loadcentres for residential commercial applications.

Robust surface mount plastic DIN rail loadcentre with hinged cover to protect control equipment.

An IP30, simple plastic cover for DIN rail control equipment including MCBs and RCDs.

Small main boards & CT chassis systems manufactured from 1.6mm zinc coated steel or 316 stainless steel made suitable for mounting of various transformers.

Accessories for telecommunications cabinets including doors, 48VDC power distribution products, drawers, shelves, mounting and superstructure products and cable management.

Suitable for voice or data cabling for up to 500 pairs and are available in two configurations to suit with models for indoor and outdoor installations.

Enlogic locking IEC power cords provide protection against accidental power loss of your attached IT equipment

Segregate customer racks and equipment into defined zones where there is a need to enhance security between customers within a data centre environment.

Cold aisle containment increases cooling efficiency, reduces power consumption by preventing different air temperature zones from being mixed together in a data centre.

B&R’s Class B and Class C 19 inch security cabinet solutions are suitable for protecting equipment to government security standards.

The Ausrack Plus Network and Server cabinets are enhanced with the addition of vertical and horizontal cable management solutions.

A non-metal, IP66 rated enclosure suitable for harsh environments and low voltage (LV) double insulated applications.

The EMO range of wall mounted air conditioners are designed for outdoor applications.

An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.

The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.

A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.

The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.

An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.

An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.

An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.

Climate control accessories such as spare filters to prevent dust entering the enclosure, thermostats, humidistats, level switch and solenoid valves.

The WID range of anticondensation heaters are suitable for installation in all enclosures, designed to protect equipment from water damage due to condensation.

A range of roof mounted air-water heat exchangers designed to cool electrical enclosures using a chilled water source.

The MIX range of wall or door mounted air-air heat exchangers have been designed to cool electrical enclosures using ambient air.

The range of roof mounted air conditioners have been designed to cool electrical enclosures to prevent failure of installed equipment. Once installed the enclosure can be rated to IP54.

The EGO range have been designed to cool electrical enclosures to prevent failure of installed equipment. Once installed the enclosure can be rated to IP54.

B&R’s range of IP43/IP55, type-tested, certified, switchboard building system for Low Voltage switchboards and motor control centres (MCC’s).

A range of products to support management of data centre cooling efficiency.

B&R’s patented split captive plug ring design means easy removal of plugs without the hassle and waste of cutting power cords.

Designed for installation in telephone exchanges to house standard telecommunications equipment & accessories. These racks are to be secured to a superstructure.

A range of enclosures designed for installation of telecommunications equipment inside a customer’s premises.

The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.

Light duty wall mount 19″ bracket. Suitable for applications where cabinet mounting is not practical and space is limited.

A rack with 4 corner posts often used for Transmission & Data Applications in telecommunications exchange & data centre environments. For 19, 21, 23 or 26 inch equipment.

A 2-post frame designed to provide a functional and cost effective solution where accessibility is a major requirement.

A 19 inch server rack frame that can be configured into suites & clad as per application requirements. The server rack features allow cable access across the front and rear of the rack.

A 19 inch network cabinet combining versatility & strength with easy-to-use features. Accommodates medium to large passive patching networks & active communications equipment.

Designed as a purpose built 19″ server cabinet. The Ausrack Plus Server features well thought out mounting options and excellent cross flow ventilation.

The sloping roof electrical box is made from 316SS and is suitable for use in Zones 1 & 2, 21 & 22 applications.

The flat roof electrical box is made from 316SS and suitable for use in Zones 1 & 2, 21 & 22 applications.

Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.

An IP66, 19 inch cabinet system designed to protect sensitive network equipment from harsh environments where equipment is exposed to dust or water.

A range of floor standing cabinets for small networking applications with mesh doors and 10-way Australian 3-Pin power rail.

Suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

A customisable enclosure suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

Suitable for use within chemical, petrochemical, dust and grain applications where a small enclosure is required.

An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.

The sloping roof electrical box is made from 316SS and is suitable for use in Zones 1 & 2, 21 & 22 applications.

The flat roof electrical box is made from 316SS and suitable for use in Zones 1 & 2, 21 & 22 applications.

Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.