Ausrack IP – 316SS
A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.
A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.
An IP66, 19 inch cabinet system designed to protect sensitive network equipment from harsh environments where equipment is exposed to dust or water.
An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.
An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
The Connector TE is a steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Enclosures designed for protection of electrical equipment in applications where flammable liquids, gases and vapours or combustible dusts are present.
Enclosures designed for protection of electrical equipment in applications where flammable liquids, gases and vapours or combustible dusts are present.
The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.
Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
Standard control stations that can be combined into one unit using a maximum of six in configurations to suit the application requirements.
An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.
A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.
The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.
The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.
The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.
Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch IP from B&R is an IP66, aluminium general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch IP from B&R is an IP66, steel general purpose enclosure and switchboard building system with a huge range of accessories.
An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.
The Pilbara SP is an IP66 enclosure for the mining and mineral processing industries. Developed to withstand the harsh environments of the Pilbara, it features a 30 degree sloping roof.
An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.
The Polynova PC series is a range of IP66 modular thermoplastic, general purpose enclosures. They are available in 19 sizes and have a wide variety of accessories to suit almost any application.
The Polynova PS range, an IP66 high performance enclosure system that is suitable for indoor and outdoor applications including use in full sunlight. Choose from 24 sizes with the choice of opaque or transparent lids.
A non-metal, IP66 rated enclosure suitable for harsh environments and low voltage (LV) double insulated applications.
A customisable enclosure suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.
Suitable for use within chemical, petrochemical, dust and grain applications where a small enclosure is required.
Suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.
B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from 316 stainless steel with an N4 finish.
B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from powdercoat painted steel.
An IP66, highly robust distribution board system. Designed to be the ideal extension to the B&R Infinity 3G switchboard range and typically used in commercial, industrial and some multi-residential developments.